汽車EMC底盤測功機

　　可以集成進轉盤內。滿足EMI/EMS測試環境的要求。對于EMI測試環境，滿足CISPR12 的本底噪聲要求；對于EMS測試，可以滿足200V/m的測試要求。德國Maturo公司的汽車EMC測功機的單輪功率可達22kW, 轉盤直徑達7.5m。
　　測功機四輥獨立運作。每輪由一個單獨的電動機/發電機系統。它可用于加速/減速和加載模式。

整個系統有如下幾部份組成：

轉盤：
1 Turn table TT 6.5-3.5t-DYN Diameter 7.5 m Payload 3500 kg (additional to Dyno) Height 1.5 m For vehicles with a max. lengths of 5.5 m Specifications: - Controlled via fibre optic link with Remote Control Unit MCU (included) - Emergency Switch - Frame for dynamometer - Distributed Energy Chain for Power and Control Lines - Car fixing elements

測功機：
1 Chassis Dynamometer DYN 4WD_I-3t Max speed 100 km/h Acceleration 10 m/s2 (1g) Permissible axle load 1500 kg per axle Axle distance 2.3 to 3.2 m Specifications: - with 2 active axles - Integrated into turntable TT 6.5-3.5t-DYN - For cars with rear /front and four wheel drive - Controlled by a PC via fibre link

測功機控制軟件及工控機：
- DYN Control Computer PC with Pentium processor & screen (or Laptop), keyboard, mouse and the necessary hardware Control program Error message warnings integrated into software

內置風冷系統：
- Integrated Cooling fan system Wind speed: 60 km/h Air flow: 20.000 m3/h Dimension air outlet: approx. 1.0 m x 0.33 m With honeycomb inlets at the ground plane level Air outlet section above the turntable is made of non-metallic material

尾氣排放系統：
- Exhaust gas system 2 flexible exhaust pipes underneath the turntable from the centre to a defined handing over (max. length of exhaust pipes: 10 m) Temperature range for the exhaust gas system 200° Celsius Pressure resistance 750 Pa Note: The complete exhaust outflow shall be designed from the chamber manufacturer